Anti-Blemish LED Light Therapy Face Mask
Blue light therapy mask for clearer, blemish-free skin
- We accept:
- More
Delivery Methods
60-Day Money Back Guarantee
For a change of mind return, your item must be unused and in the same condition that you received it. It must also be in the original packaging with all seals intact.
Money Back Guarantee: If within 60 days you are not completely satisfied with your item, you can return the item and receive a refund minus a ten percent restocking fee.
Two Years Warranty: You are eligible for a full refund if your item proves to be faulty within six months, we also cover the return cost. Should your item prove to be faulty after six months, you are eligible for store credit or exchange only.
What you need to know:
- Controls oil production, reduces shine
- Reduces redness and calms irritated skin
- Blue (415nm) and red (633nm) LED wavelengths work in synergy to target blemishes more effectively than blue light alone
- 60-Day Money Back Guarantee Not completely satisfied? Find out more
COMPLETE ACNE SOLUTION
Anti-Blemish LED Face Mask before and afters
Select a benefit to reveal genuine customer results:
Combined LED tech to treat blemishes
Our LED Anti-Blemish Mask uses 132 LED lights that emit two clinically proven wavelengths - blue (415nm) and red (633nm). LED Blue Light Therapy can help eliminate blemish-causing bacteria, but the combination of red and blue wavelengths is proven to target blemishes more effectively than blue light alone.
Blue light therapy is proven to eliminate blemish-causing bacteria, while red light therapy is proven to reduce inflammation and calm redness. The two clinically proven wavelengths create harmony for your skin. Battle your breakouts with our Anti-Blemish Mask for clearer, smoother, shine-free skin.
Complete coverage to treat breakouts across the face
Our patented pillow technology enhances the distribution of the LED wavelengths for complete and evenly distributed skin coverage.
Each LED bulb is embedded in a transparent silicone case within the mask. This diffuses the light to boost skin coverage. Better coverage means better results— the more LED light that covers your skin, the more effective the results. Your skin deserves a break, not breakouts.
Your questions, answered
Our in-house beauty tech experts answer your most commonly asked questions.
Step 1: Conduct a sensitivity test.
Step 2: Cleanse and dry your skin. Attach the mask securely around your head and adjust the straps comfortably.
Step 3: Switch on, then sit back and relax for your 10-minute light therapy session.
Step 4: Remove the mask from your head, wipe clean and safely store.
Step 5: Continue with the rest of your skincare routine.
We recommend using the device 3 to 5 times for 6 weeks to see best results. After 6 weeks of consecutive use, give your skin a short break of 1 to 2 weeks before resuming for another 6-week rotation.
Yes. It’s important to limit exposure to blue LED light, we recommend using the provided protective goggle inserts for the duration of your light therapy session.
Please read the full list of contraindicated skincare, medication and other ingredients before using this device. These can be found below in our Contraindications.
Blemishes refer to imperfections on the skin, such as discolouration, spots or marks, caused by various factors like hormonal changes, genetics, stress, skincare, diet and environment.
Our Anti-Blemish LED Face Mask targets mild to moderate spots, pimples and whiteheads. However, it's not effective for treating pockmarks or indentations from previous spots, nor is it recommended for those with a history of melasma. If you have severe acne, please consult your doctor.
Blue light therapy gets absorbed by the cells on the skin’s surface, specifically targeting spot-causing bacteria (p. acnes).
Red light therapy works below the skin’s surface to lower inflammation, soothe redness for a brighter, clearer skin tone.
This mask uses red (633nm) and blue (415nm) LED wavelengths at the same time. When these two colours mix, they show as a purple pink light.
Clogged hair follicles due to excess oil, dead skin cells, dirt, or makeup can cause blemishes, while hormonal changes can increase oil production, leading to pore blockage.
And while stress alone doesn’t cause blemishes, it can aggravate the symptoms.
Certain skincare and makeup can block the LED light from entering the skin. We recommend using the LED face mask on clean, product free skin.
The device is 100% pain free. It does not get hot and should not feel uncomfortable.
6 to 8 hours for a full charge.
Wipe down the transparent side of the LED face mask with water-based wipes or a damp, lint free cloth. Stubborn stains can be gently removed with 70% rubbing alcohol. We recommend cleaning your mask before every use to keep it fresh.
Test yourself for light sensitivity prior to using:
1. Check the list of contraindications to ensure you are not using any skincare which cause photosensitivity or taking any medications (oral or topical) which cause photosensitivity reactions.
2. Ensure your skin is clean and dry.
3. Place your LED product in contact with the skin. Ideally inner thigh, arm or back of hand.
4. Turn your device on and complete a full treatment.
5. Please note if at any time you experience heat or discomfort stop your treatment immediately.
6. After 24 hours, if there are no reactions, carry out the treatment protocol indicated for your device.
7. If you experience any reactions please contact our customer support team.
Power Input: 100-240Vac / 50-60Hz
Power Output: 5.0V-1.0A
Product Weight: 350g
Dimensions: W 429mm x L 197mm x H 5mm
Wavelengths: Red (633nm), blue (415nm)
Power Source: Lithium Ion Battery
Power Density: 30mW/cm²
Number of LED’s: 66 red (633nm) diodes and 66 blue (415nm) diodes
Operating Environment Temperature: 10-35˚C
Operating Environment Humidity: 30-80%RH
Storage Environment Temperature: 20-60˚C
Storage Environment Humidity: 30-90%RH
This appliance must not be used by children aged 12 or under.
People aged between 13 and 18 must always use the appliance under adult supervision.
Please consult your doctor before use if you are, or suspect you are pregnant or breastfeeding.
Please consult your doctor before use if you have, or suspect you have, cancer.
DO NOT use the device if it is wet. If the device has been dropped in water, you must first unplug it before touching it.
Blue light is harmful to the eyes, so always make sure that the glasses are correctly fitted ensuring no light is projected into the eyes when using the device.
DO NOT use if your skin is red or inflamed due to a previous treatment.
DO NOT use the device to treat skin that is painful to the touch, raised (higher than the surrounding skin), crusted or bleeding. This may be a sign of a more serious condition and should be investigated by your doctor.
No modification of this equipment is permitted.
STOP using the device and consult your healthcare provider if you have an adverse reaction to the use of the device.
STOP your treatment if it feels hot or if your skin feels uncomfortably warm.
DO NOT use the device on unpigmented spots or areas of skin affected by vitiligo.
DO NOT open if you have had recent surgery/other surgical procedures or if you have a bacterial infection, as this may lead to worsening of symptoms.
DO NOT use or store the device near hot surfaces, in direct sunlight or where the temperature exceeds 100F, as this may damage the plastic coating of the device.
DO NOT use solvents or abrasive cleaners on the appliance.
DO NOT use the appliance in any way other than that specified in the User Manual.
DO NOT use the device with a USB-C cable other than the one supplied by CurrentBody. The device must only be used with the USB cable supplied. If any part of the main adapter or cable is damaged, discontinue use and contact CurrentBody.
DO NOT scratch the light-emitting surface.
Ask your doctor before use if:
You are taking any prescription or over-the-counter medicines known to cause light sensitivity. You can find more information and a list of drugs that can cause light sensitivity here.
Have suspicious or cancerous lesions.
Have photosensitive disorders or genetic eye diseases.
Do not use the device on areas with phlebitis, thrombophlebi-tis and varicose veins or if you have a medical history of light-triggered seizures or epilepsy.
Skincare which treats causes of and active acne are contraindicated against for use with this device.
Contraindicated Skincare: salicylic acid, AHA and BHA exfoliants, glycolic acid, fruit acids, retinoids, hydroquinone, retinol, benzoyl peroxide, along with any other skincare which causes sensitivity to the sun or photosensitive/phototoxic reactions.
Medications which are known to cause photosensitivity (only most common). Please check with your doctor if you are unsure if it will cause a photosensitive reaction.
Contraindicated Medications: Antibiotics; particularly those for treating skin conditions, or roaccutane; do not use within 6 months, steroids, topical or injectables. If you've had injections, you will need to wait 3 months before using LED, diuretics and St John’s Wort.
Other contraindicated ingredients include coal tar, deodorants, antibacterial soaps, artificial sweeteners, naphthalene (moth balls), petroleum products, brightening agents found in laundry detergents and cadmium sulphide (a chemical injected into the skin during tattooing).
Click here to download the Anti-Blemish LED Face Mask Product User Guide and Manual
Discover more
Need some help?
Our friendly experts are here to help you to find your perfect beauty device.
View more products
Recently viewed
Shop the items you have recently viewed.